|
Your IP Address
|
|
For security, your IP is recorded as:
3.238.134.157
|
|
|
Cellular phone amplifiers on this page will work with all 800Mhz service providers. The cell phone amplifiers below are not for Cingular, Sprint and T Mobile 1900Mhz systems or Nextel systems.
To find out if your service is on 800Mhz or 1900MHz go to www.wirelessadvisor.com and enter your zip code into the box provided, or phone your service provider. If you travel to various areas a dual band Wilson cellular amplifier is recommended as it will cover both 800MHz and 1900MHz areas.
Wilson Cellular phone booster, wirelss repeater amplifier and antennas are top of the line equipment. When a Wilson Electronics cellular repeater amplifier and cellular antenna are used together they can boost a cell phone signal from 0 to 6 bars which can easily increase the range to fifty miles or more on flat land virtually eliminating signal drop out. Wired (Direct Connect) or wireless cellular amplifier's are available.
The Wilson 12" magnet mount cellular antenna is recommended for cars, SUV's and pick ups. The Wilson no ground Trucker cellular antenna works well on 18 wheelers, motor homes, boats and buildings. The Wilson Yagi directional cellular antenna is recommended for in-building use.
The new Wilson repeater "SMART" cell phone amplifier features indicator lights that tell you if the equipment is installed and functioning correctly. They also regulate the power of the wireless cellular amp to keep it from oscillating between the inside & outside antenna. They also automatically adjust the amp power output to prevent the cell phone booster from overdriving the cell site when close by. Overdriving can cause the cellular towers to drop signals.
Special Wilson cellular booster amps and Wilson cellular antennas are available for Nextel cellular customers. Nextel has their own cellular band so Wilson has designed cellular amplifiers and cellular antennas that are tuned specifically for Nextel cell phones.
FOR TECHNICIAL ASSISTANCE YOU CAN CONTACT WILSON TECHNICIANS AT 866-294-1660. or email tech@wilsonelectronics.com
Cellular Tower Locator Map: http://www.cellreception.com
Find your cellular provider Frequency (800MHz or 1900MHz) at: http://www.wirelessadvisor.com
|
Cellular Amplifier 50dB Smart Amp In-Bldg. #801105
(1920)
*NEW Wilson Single Band 50dB Smart Amplifier
*Automatically adjusts from 30 to 50dB to prevent overdriving the cellular tower.
*824-849MHz Uplink, 869-895MHz Downlink
*Output Power 3 watts
*Power 120Vac adaptor included (Output 6Vdc 225ma Max)
*Connectors: N Female
*Dimensions: 4.5" x 3.5" x 1.25"
|
|
|
|
|
Cellular Amplifier 60dB Smart Amp In-Bldg. #801106
(1921)
*NEW Wilson Single Band 60dB Smart Amplifier
*Automatically adjusts from 30 to 60dB to prevent overdriving the cellular tower.
*824-849MHz Uplink, 869-895MHz Downlink
*Output Power 3 watts
*Power 120Vac adaptor included (Output 6Vdc 225ma Max)
*Connectors: N Female
*Dimensions: 4.5" x 3.5" x 1.25"
|
|
|
|
|
Wilson 60dB In-Building Wireless Amp (#801104)
(1918)
CLOSEOUT PRICE. ONLY 1 OR 2 LEFT
*824-849MHz up-link, 869-894MHz downlink
*Output 3w
*Increase range by 50 miles or more on flat land.
*60dB up-link & down-link
*Can be used with multiple phones.
*Can be used with phones that do not have an external antenna jack.
*No phone adaptor needed.
*110V AC adaptor included
*Size: 5.5" x 4.3" x 1.4"
*Recommended accessories:
-Wilson Trucker, 12" magnet mt. or Yagi antenna (outdoor)
-Wilson Stealth, Dome or Wall antenna (indoor)
-Coax cable extension for antenna, if needed
*See "Adaptors & Accessories"
List Price:
$699.95
Our Price:
$489.95
You Save:
$210.00 (30%)
|
|
|
|
|
|
|
|
|
