*Trans-Trap Surge Protectors are gas surge
arresters designed to protect sensitive electronic equipment from damage due to
excess voltage or currents generated by transient phoenomena (lighting or static
build-up).
*The surge protector will short to ground during a
near lighting strike sending excess current down the ground wire insted of going
into the equipment.
*The removable Arc Cartridge may need to be repalced
after hundreds of protective firings. It is easily removable from the surge
protector without tools.
*The ground lug can be connected to a outdoor ground
spike or an indoor water pipe using a ground wire. (not supplied)
*In-Line
*Two N Female ends
*Frequency: 0 to
3000MHz
*VSWR: 1.10 from 0 to 1000MHz
*DC Blocking: None. Will pass DC for
power control purposes. Max. DC or peak AC is 150V.
Breakdown Voltage 20 to
30V
*Surge Current: 5000 A (8/20 uS rise)
*Size: 1" x 1 1/4" x
.875"
*Grounding: Single Hole. 1/4 -20 x 7/8 stud
*Recommended
accessories:
-Wislon 2' in-building coax jumper #95113 is needed
to connect the surge protector.
Wilson Cellular - Lightning Surge Protector - Large
Image